Mimaki UJV-160 UV-LED Hybrid Printer (60-inch)
  Loading... Please wait...

Our Newsletter

Mimaki UJV-160 UV-LED Hybrid Printer (60-inch)

UJV-160 UV
573.00 LBS
Calculated at checkout
Bookmark and Share

Product Description

With unlimited applications, UJV-160 provides an optimal solution to a variety of printing needs.
From acrylic board, aluminum composite board, corrugated cardboard, pasteboard, PVC, synthetic paper to PET, print on the broadest range of substrates with just one single printer.
UJV-160 employing UV LED curing technology offers highest productivity and expands your business opportunities.

No drying time, no media deformation

The new UV LED curing technology does not emit infrared rays thus enabling print on heat sensitive materials. UV LED curing with UV inks means instantaneous drying that eliminates post-printing drying time. This innovation leads to dramatic reduction of job turnaround time (from printing to processing) and increase in productivity.

ECO-friendly UV LED curing technology

UV LEDs have a longer lifetime and save about 50 % in energy in comparison with conventional UV printers employing halide lamps. Another environmental friendly aspect of UV LED technology is the fact that it does not emit short wave ultraviolet rays which generate ozone.

Compatible with rigid media up to 10mm thickness and 12kg

UJV-160 prints not only on roll media but also on rigid media. Equipped with a feed and delivery table, it enables direct printing on rigid media up to 10 mm thickness and 12 kg. Compactly designed, the table can be folded when not needed thus allowing for a smooth changeover between roll and rigid media.

*Print accuracy may vary depending on types and coating of media. 
 Please test the media beforehand.


Head On-demand Piezo head
Print resolution 600 dpi, 1200 dpi
Ink UV curable ink (both flexible and hard types are available)
5 color: C,M,Y,K,W / 1,200 ml (600 ml × 2 cartridge)/color
Maximum print width Roll: 1,610 mm (63.3 "), Rigid: 1,600 mm (63.0 ")
MediaWidth 1,620 mm (63.7")
Thickness Max. 10 mm (0.39")
Weight Roll: less than 25 kg (55 lbs.)
Rigid: less than 12 kg (26.4 lbs.)
Roll diameter Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Media cutting Manual cutting
UV device Equipped with UV Light Emitting Diodes
Media heater Pre / print heater
Media take-up device Roll take-up device (Standard), inside / outside selectable
Interface USB 2.0
Applicable standard VCCI class A, UL60950-1, FCCI class A, 
CE marking (EMC directive, low voltage directive), 
CB report, RoHS
Power specifications AC 100 V – 120 V, 200 – 240 V ± 10 %, 50 – 60 Hz ± 1 Hz,
less than 1.68 KVA
Operational environmentsTemperature 15°C – 30°C
Humidity 35 – 65 % Rh (No condensation)
(W x D x H)
Main unit 3,300mm x780mm x 1,290mm (129.9" x 19.8" x 50.7")
Main unit
+ media stand
3,300mm x 4,300mm x 1,290mm (129.9" x 169.3" x 50.7")
(Main unit and table with support wire)
WeightMain unit 260 kg (573 lbs.)
Media table 50 kg (110 lbs) x 2 units
  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without notice(for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
Inks and substrates
·Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
·Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:
・Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
・Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
・In addition, please read the instructions and guidelines of the manual carefully and follow those.

Find Similar Products by Category

LiveZilla Live Chat Software

Currency Converter

Choose a currency below to display product prices in the selected currency.

United States USD
Australia AUD
European Union EUR
United Kingdom GBP

Add to Wish List

Click the button below to add the Mimaki UJV-160 UV-LED Hybrid Printer (60-inch) to your wish list.

You Recently Viewed...



My Account

Mimaki CJV30 Series - Roland VersaCamm VS Series

Engraving Machine